Rhino.fi logo

BLOG

/

Stablecoins as a cross-border payments solution: what they replace in a SWIFT flow

By Lexi Short

/

Stablecoins work as a cross-border payments solution by moving a dollar or euro token between two businesses on a public blockchain. The value settles in seconds or minutes, at any hour, with no banks in between. What they replace is the middle of a SWIFT payment (an international bank transfer sent over the SWIFT messaging network): the chain of banks, the pre-funded accounts behind them and the opening hours they keep. The two ends, where money enters and leaves a bank account in local currency, still run through licensed providers.

A supplier payment sent from a European platform to a business in Lagos on a Friday afternoon shows where the time goes. The payment reaches the Nigerian bank within the hour, then waits in that bank’s local processing, so it may be credited only after the weekend. SWIFT’s own data points to this last leg as the slow part.

This guide is mainly for the product, engineering, payments, treasury and finance operations leads, and the executives they report to, at businesses that move money across borders for their customers: typically remittance and cross-border providers, payment service providers (PSPs), neobanks, banking-as-a-service (BaaS) providers, and payroll and payout platforms.

Many of them are adding a stablecoin rail (a way to send payments over stablecoins) beside their bank rails. The guide walks through a SWIFT payment step by step and shows what a stablecoin payment replaces and what it leaves in place. It then explains why the payer’s chain, more than the border, decides how fast the money lands. Rhino.fi provides stablecoin settlement infrastructure, and its main product is the Stablecoin Activation Stack, so its own model gets one section near the end.

Quick Answer

A stablecoin cross-border payment replaces the correspondent banks, pre-funded accounts and business-hours windows of a SWIFT payment with one transfer on a blockchain, which runs around the clock. Converting between local currency and stablecoins still needs a licensed on-ramp and off-ramp at each end: services that change local currency into stablecoins and back. Settlement time then depends mainly on the chain the payer sends from.

How a SWIFT payment moves money across borders

A SWIFT payment moves money between banks in different countries by passing a payment message along a chain of banks that hold accounts with each other. SWIFT carries only the messages, while the money itself moves as debits and credits on accounts that banks keep with one another, called correspondent accounts.

Three more terms come up throughout this guide, and it helps to define them now:

  1. A correspondent bank holds money and makes payments on behalf of another bank, usually in a currency or country where that bank has no branch.

  2. A nostro account is the account a bank keeps, pre-funded, at its correspondent abroad.

  3. A business-to-business (B2B) cross-border payment is a payment between two companies in different countries, such as a supplier invoice or a payout.

A typical SWIFT payment runs in this order:

  1. The sending business instructs its bank, and the bank debits its account.

  2. The bank sends a payment message to the next bank in the chain, which may be its correspondent or an intermediary that connects the two.

  3. Each bank in the chain runs its own checks, applies its cut-off times (the latest hour at which it accepts a payment for processing that day) and may deduct a fee.

  4. Currency is converted at some point in the chain, at the rate of the bank doing it.

  5. The beneficiary bank receives the funds and credits the recipient’s account in local currency.

Speed has improved in the middle of the chain: SWIFT reported in October 2024 that 90% of cross-border payments over its network reach the destination bank within an hour. The last step is slower, since across the 40 countries it measured, 43% reach the end customer’s account within an hour (SWIFT press release, 17 October 2024). SWIFT named market infrastructure opening hours, regulatory requirements and local market practices as the causes.

The correspondent network, meaning the set of relationships through which banks hold accounts and make payments for one another across borders, has also thinned. Correspondent banking relationships fell by about 25% between 2011 and 2020, while cross-border payment volume and value still rose in 2020 (BIS, 13 December 2021), which leaves fewer routes into some countries.

The G20 has set a target of 75% of cross-border wholesale payments credited within one hour of initiation by the end of 2027 (FSB, 2021). In October 2025 the Financial Stability Board, which coordinates that work, said satisfactory improvement at the global level is unlikely on that timetable (FSB, 9 October 2025).

What a stablecoin payment replaces in a SWIFT flow

Once a payment moves to stablecoin rails, the correspondent chain is replaced by one transfer recorded on a blockchain, where the message and the money move together.

Step

SWIFT payment

Stablecoin payment

Funding

Debit from the sender’s bank account in local currency

A stablecoin balance the business already holds, or local currency converted through an on-ramp

Instruction

A payment message passed from bank to bank

The transfer itself, recorded on the chain

Route

One or more correspondent or intermediary banks

A transfer between two wallets on one chain, plus a cross-chain step if the two sides use different chains

Liquidity

Pre-funded nostro accounts in each currency

A stablecoin balance on the chain the payment settles on

Currency conversion

At the rate of the bank in the chain that converts

Between stablecoins (USDT to USDC, or USDC to EURC), or at the off-ramp into local currency

Fees

Each bank in the chain may deduct a fee from the amount

A network fee and the provider’s fee, which a provider can fix in the quote

Hours

Bank opening hours and cut-off times

Around the clock, every day

Screening

Sanctions and payment checks at each bank

Know Your Transaction (KYT) screening, which traces where the funds come from and go to, and anti-money laundering (AML) checks on the wallets involved

Final credit

The beneficiary bank credits the account

The recipient’s wallet or provider is credited, or an off-ramp pays out to a local bank

The largest change is in the liquidity row, where liquidity means money held ready so payments can go out. A bank paying through correspondents keeps that money parked in nostro accounts abroad, while on stablecoin rails the equivalent cost is holding a balance on each chain a business settles on. Some providers carry that balance themselves and pay out from it, the model Rhino.fi compares to Wise in its post on liquidity orchestration.

What stays the same on stablecoin rails

Stablecoin rails change how value crosses the border, and the obligations at each end stay where they were. A business still needs a licensed way in and out of local currency, still checks who its customers are and still follows the payment rules of each country it serves:

  • An on-ramp converts local currency into stablecoins and an off-ramp converts them back into a bank account, although neither is needed if both businesses hold and use stablecoins.

  • Know Your Customer (KYC) checks on customers and counterparties remain the job of the regulated business on each side.

  • Some payments, such as wages or taxes in many countries, have to be made in local currency.

  • An onchain transfer cannot be recalled by a bank once it is final, so the address and the chain have to be right before funds are sent.

Why the payer’s chain matters more than the border

Once a payment is on stablecoin rails, the time it takes depends mostly on the chain the payer sends from rather than on the countries involved. Each chain confirms transactions at its own pace, so the same payment from two chains can land seconds or minutes apart, and that gap shows up in the time to usable balance: how long it takes until the business can actually use the funds.

Rhino.fi’s own route data shows the size of that gap. Between 1 July and 30 September 2026, Rhino.fi completed 376,488 fast-mode payments to Base from six origin chains, with the same destination and the same infrastructure (deterministic settlement). On five of the six routes, the median payment settled in 3 seconds or less, and in 1 second from BNB Chain. From Ethereum the median was 48 seconds, the slowest of the six, because Ethereum adds a new block about every 12 seconds and a payment is released only once its deposit has enough blocks confirmed on top of it. Ethereum was also one of the most predictable routes, with 99% of payments settled within 71 seconds.

The token matters as well, because a counterparty in Lagos, São Paulo or Manila may hold USDT on TRON, the network where much of the world’s USDT moves (why TRC-20 USDT dominates), while the business receiving the payment may run its treasury in USDC on Base. In that case, the payment has to cross from one chain to another and convert from one token to another before it is usable.

Conversion between dollar stablecoins has a cost of its own: on 19 November 2026, 1 USDC traded at about 1.001 USDT, a gap of about 10 basis points (hundredths of a percent) (USDT vs USDC). The same ticker (the short name a token trades under) is also a separate asset on each chain, with its own contract, and some versions carry a different name: USDT on Arbitrum, for example, is issued as USDT0, while on Avalanche native USDT sits beside USDT.e, a version bridged from Ethereum.

For that reason, one of the first things a business should do is map the routes and rails its customers typically use to move their stablecoin funds, meaning the chains and tokens they use, in addition to the ones its own treasury uses.

Cross-border payments companies and where stablecoins fit

Since stablecoins replace the middle of the flow and leave both ends in place, cross-border payments companies fall into four groups by the part of the flow they cover:

  • Banks and their correspondent networks send payments over SWIFT and convert currency within the chain.

  • Money transfer and B2B payment platforms hold local accounts in many countries and pay out from them, offsetting payments in one direction of a corridor (a country-to-country payment route) against payments in the other, which is called netting.

  • Stablecoin payment platforms combine fiat (government-issued currency) accounts, on- and off-ramps and stablecoin transfers under their own licences.

  • Stablecoin infrastructure providers run the onchain leg, which covers accepting stablecoins on many chains, converting between them and settling the result where the business needs it.

Rhino.fi belongs to the last group, so a business that already has fiat partners in its corridors can add it as the stablecoin leg. Named providers in each group are compared in stablecoin infrastructure companies compared.

Where Rhino.fi fits in a cross-border flow

Within that flow, Rhino.fi covers the stablecoin leg through its Stablecoin Activation Stack: it takes a stablecoin sent on a supported chain and settles it in the token and on the chain the business chooses, across a platform of more than 30 chains. It pays out from its own liquidity on the destination chain, so the payment does not wait for funds to cross a bridge (a service that moves tokens from one chain to another).

A flow that starts or ends in a bank account pairs Rhino.fi with a licensed on- and off-ramp provider, and Rhino.fi plans to add its own on- and off-ramps in the first quarter of 2027. The remittance provider page shows how Rhino.fi routes a corridor over stablecoins.

Deposits, conversion and quotes

On the stablecoin leg, Rhino.fi takes the payment in, converts it where needed and fixes the fee in advance:

  • Each customer or counterparty gets a Smart Deposit Address, a deposit address that accepts supported stablecoins and settles them to the business’s chosen chain and token (Smart Deposit Addresses).

  • Rhino.fi also sends funds out to a wallet on another chain, so the business can pay recipients who hold their funds elsewhere (docs).

  • Rhino.fi converts between dollar and euro stablecoins, such as USDC and EURC, at the rate fixed in the quote (Bridge and Convert).

  • With 1:1 Stablecoin Settlement, USDT and USDC convert into each other at 1:1 from Rhino.fi’s own reserves, within volume limits, while the market rate stays within 3 basis points of 1:1, a band that the Advanced Fee & Limit Management extension can widen up to 20 basis points (1:1 settlement docs).

  • Rhino.fi fixes the fee in the quote and holds it until the quote expires, which makes the settlement deterministic (fees and limits).

Screening, liquidity and speed

Around each payment, Rhino.fi also runs the checks and the liquidity that let it settle quickly:

  • Rhino.fi screens every incoming and outgoing transaction for KYT, through TRM Labs, and for AML before funds are credited.

  • Deposits in unsupported tokens that Rhino.fi monitors trigger a rejection alert and are held, so the team can return them.

  • Rhino.fi keeps liquidity on every supported chain and rebalances it in the background, out of the payment’s path (liquidity orchestration).

  • Settlement typically takes under 10 seconds below $500,000, and typically under 60 seconds from $500,000 to $5 million.

  • On top of that, each payment waits for the origin chain to confirm the deposit, which is why routes from Ethereum take longer, as described earlier.

What stays with the business

The rest of the flow stays with the business that uses Rhino.fi:

  • It arranges the on- and off-ramps into local currency, and the banking partners behind them.

  • KYC on its own customers and counterparties remains its job, as described earlier.

  • It keeps its own ledger, its customer balances and the fees it charges.

  • It decides the corridors it offers and the chains and tokens it shows its customers.

What the published figures show

Rhino.fi’s published figures give the scale of the platform:

  • Rhino.fi has settled more than $15 billion in stablecoin volume across more than 30 chains, and $10 million is its largest single transaction (rhino.fi).

  • Its deposit success rate is 99.99% across the flow from deposit to activation, the point where funds are usable in the product (pricing).

  • Rhino.fi estimates that a team running settlement liquidity itself “would hold seven figures of idle float to support $30M a month” (pricing), where float is money held in advance on each chain to pay out from.

  • Weekly USDT volume from TRON through Rhino.fi rose from about $1 million at the end of 2025 to a record $48 million in mid-June 2026, as measured by CryptoQuant (Beyond P2P).

What should you ask before adding a stablecoin rail?

The questions below apply to any provider of the stablecoin leg, Rhino.fi included, and they follow the order in which a payment runs:

  • Which chains and tokens do the business’s customers and counterparties hold today, and does the provider accept each of them?

  • Is the amount that arrives known before the payer sends, and how long does a quote hold?

  • How long does settlement take from each origin chain, at the median and in the slow cases?

  • Whose liquidity pays out on the destination chain, and what happens when it runs short?

  • What happens to a payment sent on the wrong chain or in an unsupported token?

  • Which screening runs before funds are credited, and which checks stay with the business?

  • Who converts between stablecoins and local currency at each end, and when is that rate fixed?

  • What is the largest single payment the route accepts?

Choosing a cross-border payments solution

As described earlier, the chains and tokens a business’s counterparties already hold decide how long each payment takes and which conversions it needs, so they are the place to start.

If you are adding a stablecoin rail to existing corridors, talk to the team with your corridors, the chains your counterparties use and your typical payment size.

Sources

Frequently asked questions

What are cross-border payments?

Cross-border payments are transfers where the payer and the recipient are in different countries, such as a supplier invoice, a payroll run abroad or a remittance. They usually involve a currency conversion and at least two payment systems, one in each country.

What is a cross-border remittance?

A cross-border remittance is money a person sends to another person in a different country, often to family. Remittance providers collect it in one currency and pay it out in another, through bank transfers, mobile wallets or cash pickup, and some now use stablecoins for the leg in between.

Is XRP needed for blockchain cross-border payments?

No, because a stablecoin payment moves a dollar or euro token directly, so the value does not pass through a separate cryptocurrency on the way. A provider that converts between stablecoins, such as USDC to EURC, does so from stablecoin to stablecoin.

Launch with an API.
Scale with a partner.

Built for complex global payments and onchain finance

Rhino.fi’s services are offered on a B2B basis to enterprise clients and are not directed at, and shall not be construed as an offer to, persons or entities in any jurisdiction where such offer would be unlawful.

© 2026 rhino.fi. All rights reserved.

Built for complex global payments and onchain finance

Rhino.fi’s services are offered on a B2B basis to enterprise clients and are not directed at, and shall not be construed as an offer to, persons or entities in any jurisdiction where such offer would be unlawful.

© 2026 rhino.fi. All rights reserved.

Built for complex global payments and onchain finance

Rhino.fi’s services are offered on a B2B basis to enterprise clients and are not directed at, and shall not be construed as an offer to, persons or entities in any jurisdiction where such offer would be unlawful.

© 2026 rhino.fi. All rights reserved.